|This article does not cite any references or sources. (November 2011)|
Modern automotive engineering, along with aerospace engineering and marine engineering, is a branch of vehicle engineering, incorporating elements of mechanical, electrical, electronic, software and safety engineering as applied to the design, manufacture and operation of motorcycles, automobiles, buses and trucks and their respective engineering subsystems.
Some of the engineering attributes/disciplines that are of importance to the automotive engineer:
Safety Engineering: Safety Engineering is the assessment of various crash scenarios and their impact on the vehicle occupants. These are tested against very stringent governmental regulations. Some of these requirements include: Seat belt and air bag functionality, front and side impact testing, and resistance to rollover. Assessments are done with various methods and tools: Computer crash simulation (typically Finite element analysis), crash test dummies, partial system sled and full vehicle crashes.
Fuel Economy/Emissions: Fuel economy is the measured fuel efficiency of the vehicle in miles per gallon or litres per 100 kilometers. Emissions testing the measurement of the vehicles emissions: hydrocarbons, nitrogen oxides (NOx), carbon monoxide (CO), carbon dioxide (CO2), and evaporative emissions.
Vehicle Dynamics: Vehicle dynamics is the vehicle's response of the following attributes: ride, handling, steering, braking, comfort and traction. Design of the chassis systems of suspension, steering, braking, structure (frame), wheels and tires, and traction control are highly leveraged by the Vehicle Dynamics engineer to deliver the Vehicle Dynamics qualities desired.
NVH Engineering (Noise, Vibration, and Harshness): NVH is the customer's feedback (both tactile (feel) and audible (hear)) from the vehicle. While sound can be interpreted as a rattle, squeal, or hoot; a tactile response can be seat vibration, or a buzz in the steering wheel. This feedback is generated by components either rubbing, vibrating or rotating. NVH response can be classified in various ways: powertrain NVH, road noise, wind noise, component noise, and squeak and rattle. Note, there are both good and bad NVH qualities. The NVH engineer works to either eliminate bad NVH, or change the “bad NVH” to good (i.e., exhaust tones).
Vehicle Electronics: Automotive electronics is an increasingly important aspect of automotive engineering. Modern vehicles employ dozens of electronic systems.1 These systems are responsible for operational controls such as the throttle, brake and steering controls; as well as many comfort and convenience systems such as the HVAC, infotainment and lighting systems. It would not be possible for automobiles to meet modern safety and fuel economy requirements without electronic controls.
Performance: Performance is a measurable and testable value of a vehicles ability to perform in various conditions. Performance can be considered in a wide variety of tasks, but it's generally associated with how quickly a car can accelerate (e.g. standing start 1/4 mile elapsed time, 0-62 mph, etc.), top speed, how short and quickly a car can come to a complete stop from a set speed (e.g. 70-0 mph), how much g-force a car can generate without losing grip, recorded lap times, cornering speed, brake fade, etc. Performance can also reflect the amount of control in inclement weather (snow, ice, rain).
Shift Quality: Shift Quality is the driver’s perception of the vehicle to an automatic transmission shift event. This is influenced by the powertrain (engine, transmission), and the vehicle (driveline, suspension, engine and powetrain mounts, etc.). Shift feel is both a tactile (feel) and audible (hear) response of the vehicle. Shift Quality is experienced as various events: Transmission shifts are felt as an upshift at acceleration (1-2), or a downshift maneuver in passing (4-2). Shift engagements of the vehicle are also evaluated, as in Park to Reverse, etc.
Durability / Corrosion engineering: Durability and Corrosion engineering is the evaluation testing of a vehicle for its useful life. This includes mileage accumulation, severe driving conditions, and corrosive salt baths.
Package / Ergonomics Engineering: Package Engineering is a discipline that designs/analyzes the occupant accommodations (seat roominess), ingress/egress to the vehicle, and the driver’s field of vision (gauges and windows). The Package Engineer is also responsible for other areas of the vehicle like the engine compartment, and the component to component placement. Ergonomics is the discipline that assesses the occupant's access to the steering wheel, pedals, and other driver/passenger controls.
Climate Control: Climate Control is the customer’s impression of the cabin environment and level of comfort related to the temperature and humidity. From the windshield defrosting, to the heating and cooling capacity, all vehicle seating positions are evaluated to a certain level of comfort.
Drivability: Drivability is the vehicle’s response to general driving conditions. Cold starts and stalls, RPM dips, idle response, launch hesitations and stumbles, and performance levels.
Cost: The cost of a vehicle program is typically split into the effect on the variable cost of the vehicle, and the up-front tooling and fixed costs associated with developing the vehicle. There are also costs associated with warranty reductions, and marketing.
Program timing: To some extent programs are timed with respect to the market, and also to the production schedules of the assembly plants. Any new part in the design must support the development and manufacturing schedule of the model.
Assembly Feasibility: It is easy to design a module that is hard to assemble, either resulting in damaged units, or poor tolerances. The skilled product development engineer works with the assembly/manufacturing engineers so that the resulting design is easy and cheap to make and assemble, as well as delivering appropriate functionality and appearance.
Quality Management: Quality control is an important factor within the production process, as high quality is needed to meet customer requirements and to avoid expensive recall campaigns. The complexity of components involved in the production process requires a combination of different tools and techniques for quality control. Therefore, the International Automotive Task Force (IATF), a group of the world’s leading manufacturers and trade organizations, developed the standard ISO/TS 16949. This standard defines the design, development, production, and when relevant, installation and service requirements. Furthermore, it combines the principles of ISO 9001 with aspects of various regional and national automotive standards such as AVSQ (Italy), EAQF (France), VDA6 (Germany) and QS-9000 (USA). In order to further minimize risks related to product failures and liability claims of automotive electric and electronic systems, the quality discipline functional safety according to ISO/IEC 17025 is applied.2
Since the 1950s, the comprehensive business approach Total Quality Management, TQM, helps to continuously improve the production process of automotive products and components. Some of the companies who have implemented TQM include Ford Motor Company, Motorola and Toyota Motor Company.3
A Development Engineer is a job function within Automotive Engineering, in which the development engineer has the responsibility for coordinating delivery of the engineering attributes of a complete automobile (bus, car, truck, van, SUV, etc.) as dictated by the automobile manufacturer, governmental regulations, and the customer who buys the product.4
Much like the Systems Engineer, the Development Engineer is concerned with the interactions of all systems in the complete automobile. While there are multiple components and systems in an automobile that have to function as designed, they must also work in harmony with the complete automobile. As an example, the brake system's main function is to provide braking functionality to the automobile. Along with this, it must also provide an acceptable level of: pedal feel (spongy, stiff), brake system “noise” (squeal, shudder, etc.), and interaction with the ABS (anti-lock braking system)
Another aspect of the development engineer's job is a trade-off process required to deliver all the automobile attributes at a certain acceptable level. An example of this is the trade-off between engine performance and fuel economy. While some customers are looking for maximum power from their engine, the automobile is still required to deliver an acceptable level of fuel economy. From the engine's perspective, these are opposing requirements. Engine performance is looking for maximum displacement (bigger, more power), while fuel economy is looking for a smaller displacement engine (ex: 1.4 L vs. 5.4 L). The engine size, though is not the only contributing factor to fuel economy and automobile performance. Other attributes include: automobile weight, aerodynamic drag, transmission gearing, emission control devices, and tires.
The Development Engineer is also responsible for organising automobile level testing, validation, and certification. Components and systems are designed and tested individually by the Product Engineer. The final evaluation though, has to be conducted at the automobile level to evaluate system to system interactions. As an example, the audio system (radio) needs to be evaluated at the automobile level. Interaction with other electronic components can cause interference. Heat dissipation of the system and ergonomic placement of the controls need to be evaluated. Sound quality in all seating positions needs to be provided at acceptable levels.
There are also other automotive engineers:
- The aerodynamics engineers will often give guidance to the styling studio so that the shapes they design are aerodynamic, as well as attractive.
- Body engineers will also let the studio know if it is feasible to make the panels for their designs.
- Automotive Electronic Systems Clemson Vehicular Electronics Laboratory Website, Retrieved 2/2/2013
- Functional Safety SGS-TÜV Saar, Retrieved 11/16/2012
- A Study on Total Quality Management and Lean Manufacturing: Through Lean Thinking Approach World Applied Sciences Journal 12 (9): 1585-1596, 2011, Retrieved 11/16/2012
- "Car Engineering". www.bar-tek-motorsport.de. Retrieved 27 May 2013.
Content from Wikipedia, the Free Encyclopedia
What Is This Site? The Ultimate Study Guide is a mirror of English Wikipedia. It exists in order to provide Wikipedia content to those who are unable to access the main Wikipedia site due to draconian government, employer, or school restrictions. The site displays all the text content from Wikipedia. Our sponsors generously cover part of the cost of hosting this site, and their ads are shown as part of this agreement. We regret that we are unable to display certain controversial images on some pages the site at the request of the sponsors. If you need to see images which we are unable to show, we encourage you to view Wikipedia directly if possible, and apologize for this inconvenience.
A product of XPR Content Systems. 47 Union St #9K, Grand Falls-Windsor NL A2A 2C9 CANADA